Integration of PET recycled to flexion in a concreteconstruction element

Authors

  • Raymundo Silva Herrera Institute of Technology and Higher Education, Mexico
  • Gil Humberto Ochoa González Institute of Technology and Higher Education, Mexico

DOI:

https://doi.org/10.32870/rvcs.v0i6.106

Keywords:

recycled PET, flexion, constructive element, concrete

Abstract

This research looks for the integration of recycled PET in a constructive element to be used in self-construction; it is sought to verify the viability of the use of PET (Polyethylene terephthalate) as a construction material; this research is projected considering the rules for bending work of a concrete beam. The integration of a construction system based on recycled PET seeks to capture the largest amount of PET that is discarded, integrating it into continuous strips, taking advantage of the characteristics that PET offers to flex on concrete mixtures. At the same time, the application of mathematical models that allow structural safety, as well as the necessary mechanical tests (in this case bending beams), allow us to establish efficient constructive systems that allow changing the perception in the recovery of recycled materials.

Metrics

Metrics Loading ...

Author Biographies

Raymundo Silva Herrera, Institute of Technology and Higher Education, Mexico

Architect graduated from the University of Guadalajara, currently a teacher in Sustainable Projects and Building at ITESO, Jesuit University of Guadalajara, and subject professor at the Autonomous University of Guadalajara.

Gil Humberto Ochoa González, Institute of Technology and Higher Education, Mexico

Master in Engineering Sciences from the Autonomous University of Querétaro; Civil Engineer from the Western Institute of Technology and Higher Studies (ITESO), professor and coordinator of the Civil Engineering career at ITESO. During the last years, he has worked investigating the phenomenon of land subsidence in several cities in Mexico.

References

Al-Tulaian, B., Al-Shannag, M., y Al-Hozaimy, A. (2016). Recycled plastic waste bers for reinforcing Portland cement mortar. Construction and Building Materials, núm. 127, pp. 102-110.

Ávila, A. P., Campos, A. J., y Encarnación, G. (2013).

Estudio de análisis de ciclo de vida (acv) del manejo de envases de bebidas de polietileno tereftalato (PET) en la fase de posconsumo. INEEC.

Baldenebro, F. (2015). Estudio numérico-experimental de bras de pet y su comportamiento en una matriz de concreto. Chihuahua, Chihuahua: Centro de Investigación en Materiales Avan- zados, S. C.

Borg, R., Baldacchino, O., y Ferrara, L. (2016). Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete. Construction and Building Materials, núm. 108, pp. 29-47.

Cacelín, J. (2016, 28 de junio). Rocapet, el principio de construcciones sustentables. Recuperado

el 6 de mayo de 2018, de Agencia Informativa Conacyt: http://www.conacytprensa.mx/index. php/ciencia/ambiente/8474-rocapet-el-principio-de-construcciones-sustentables-nota

Day, R. (1998). How to write and publish a scientific paper. Canadá: Orix Press.

Espinosa, F. (2016). Caracterización de botellas pet para su uso como elementos constructivos de muros de carga. Repositorio ITESO.

Gaggino, R. (2003). Elementos constructivos con PETt reciclado. Tecnología y Construcción, 19(II): 51-64.

Gaggino, R., Arguello, R., y Berretta, H. (2007). IV Encontro Nacional e II Encontro Latino-Americano sobre Edificações e Comunidades Sustentáveis. Aplicación de material plástico reciclado en elementos constructivos a base de cemento (pp. 906-915). Córdova, Argentina: Centro Experimental de la Vivienda Económica.

Gobierno del Distrito Federal. (2004). Reglamento de construcciones del Distrito Federal. Distrito Federal: Administración Pública del Distrito Federal.

Grau, J. (2018). Eco concretos. Recuperado el 6 de mayo de 2018, de http://www.concretoecologico.com.mx/

H. Congreso de la Unión. (2017, 13 de abril). Cá- mara de Diputados. Recuperado el 01 de 05 de 2018, de http://www5.diputados.gob.mx/index. php/esl/Comunicacion/Boletines/2017/abri- l/13/3469-En-Mexico-90-millones-de-botellas- de-plastico-de-refrescos-y-agua-son-lanzados- a-la-via-publica-rios-y-mares

Jo, B.-W., Park, S.-K., y Park, J.-C. (2008). Mechanical properties of polymer concrete made with recycled pet and recycled concrete aggregates. Construction and Building Materials, núm. 22, pp. 2281-2291. doi: 10.1016/j.conbuild- mat.2007.10.009.

JQ. (2016, 20 de julio). Pet: Datos técnicos. Recu- perado el 4 de julio de 2018, de http://www. jq.com.ar/imagenes/productos/pet/dtecnicos/ dtecnicos.htm

Kim, S., Yi, N., Kim, H., Kim, J., y Song, Y. (2010). Material and structural performance evaluation of recycled pet ber reinforced concrete. Cement & Concrete Compositers, núm. 32, pp. 232-240. doi: 10.1016/j.cemconcomp.2009.11.002.

Lopes, E., De Oliveira, A., y Gomes, A. (2017). Optimization of mechanical properties in concrete reinforced with bers from solid urban wastes (pet bottles) for the production of ecological concrete. Elsevier, pp. 837-848.

Macías, H. (2017). Tierra vertida + PET, una aporta- ción al sistema constructivo de muros de botellas de pet rellenas de tierra; caso Centro Comunita- rio La Mezquitera. Repositorio ITESO.

Ochi, T., Okubo, S., y Fukui, K. (2007). Develop- ment of recycled PET ber and its application as concrete-reinforcing ber. Cement & Concrete Composites, núm. 29, pp. 448-455.

Poder Legislativo Federal. (2010). Norma NMX-C- 303-ONNCCE-2010 Determinación de la exión usando una viga simple con carga en el centro del claro. Diario O cial de la Federación. México.

Rahmani, E., Dehestani, M., Beygi, M., Allahyari, H., y Nikbin, I. (2013). On the mechanical properties of concrete containing waste pet particles. Construction and Building Materials, núm. 47, pp. 1302-1308.

Rodas, C. V., y Ordóñez, J. F. (2016). Desarrollo tec- nológico, investigativo y experimental de ecobloques de hormigón con base en vidrio y polietileno de teraftalato (PET) reciclado, como alternativa sustentable al bloque tradicional. Cuenca, Ecuador: Universidad del Azuay.

Saikia, N., y De Brito, J. (2013). Waste Polyethylene Terephthalate as an Aggregate in Concrete. Materials Research, 16(2): 341-350. doi: 10.1590/ S1516-14392013005000017.

——. (2014). Mechanical properties and abrasion behavior of concrete containing shredded pet bottle waste as a partial substitution of natural aggregate. Construction and Building Materials, núm. 52, pp. 236-244.

Salcedo, O. F. (2014). Sistema de construcción de vivienda sustentable a base de tabique de plás- tico reciclado. Revista Legado de Arquitectura y Diseño, núm. 15, enero-junio, pp. 109-125.

Santamarina, R. E. (2015). Caracterización de mate- rial compuesto pet-vidrio. Córdoba, Argentina: Universidad Nacional de Córdoba.

Silva, D., Betioli, A., Gleize, P., Roman, H., Gómez, L., y Ribeiro, J. (2005). Degradation of recycled pet bers in Portland cement-based materials. Cement and Concrete Research, núm. 35, pp. 1741-

doi: 10.1016/j.cemconres.2004.10.040.

Tolozano, M. C. (2016). Uso de bloques de plástico reciclado para vivienda de interés social para mejoramiento de su micro-clima, Plan “Socio Vivienda”, del cantón Guayaquil, provincia del Guayas, zona 8. Guayaquil, Ecuador: Universi-

dad de Guayaquil.

Trespalacios, C. D. (2017). Implementación de un sis-

tema de aligeramiento de losas de entrepiso de concreto con botellas pet y cartón. Cartagena de Indias: Universidad de Cartagena.

Valis, D. (2016, septiembre). Diseñan sistema de construcción ecoeficiente. Recuperado el 6 de mayo de 2018, de Agencia Informativa Conacyt: http://www.conacytprensa.mx/index. php/tecnologia/materiales/10427-disenan-sis- tema-de-construccion-ecoeficiente

Velardi, H. (2011). Análisis y evaluación de las características termofísicas de un sistema constructivo desarrollado con botellas reutilizadas de pet y su análisis comparativo con otros sistemas constructivos. Un caso de estudio en Azcapotzalco. México, df: Universidad Autónoma Metropolitana (UAM).

Yazoghli, O., Dheilly, R., y Queneudec, M. (2007). Valorization of post-consumer waste plastic in cementitious concrete composites. Waste Management, núm. 27, pp. 310-318. doi: 10.1016/j. wasman.2006.03.012.

Zambrano, E. (2015). Diseño de elementos constituti- vos para el espacio interior mediante el reciclaje de plástico pet. Cuenca, Ecuador: Universidad del Azuay.

Downloads

Published

2019-07-12

How to Cite

Silva Herrera, R., & Ochoa González, G. H. (2019). Integration of PET recycled to flexion in a concreteconstruction element. Vivienda Y Comunidades Sustentables, (6), 99–117. https://doi.org/10.32870/rvcs.v0i6.106

Issue

No. 6 (2019): Housing and Sustainable Communities

Section

Articles

License

Copyright (c) 2019 Vivienda y Comunidades Sustentables

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The authors who publish in this journal accept the following conditions:

 In accordance with the copyright legislation, Sustainable Housing and Communities recognizes and respects the moral right of the authors, as well as the ownership of the patrimonial right, which will be transferred to the University of Guadalajara for its dissemination in open access. Sustainable Housing and Communities does not charge authors for submitting and processing articles for publication.  Authors may make other independent and additional contractual agreements for the non-exclusive distribution of the version of the article published in Sustainable Housing and Communities (for example, include it in an institutional repository or publish it in a book) as long as they clearly indicate that the work is published for the first time in Sustainable Housing and Communities.